| After-sales Service: | One Year |
|---|---|
| Warranty: | One Year |
| Type: | Coating Spray Gun |
| Samples: |
1000set
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier IG07 Filter element 1015 832
BRIEF INTRODUCTION
1) Name : IG07 Filter element 1015 832
2) Application: Powder injector Parts
| OptiFlow IG07 Powder injector - complete (pos. 1-15) | 1015 100 | |
| A | Conveying air check valve unit (red marking) - complete (incl. pos. 6, 8, 9 and 10) | 1015 830 |
| B | Supplementary air check valve unit (black marking) - complete (incl. pos. 7, 8, 9 and 11) | 1015 831 |
| 1 | Injector body - without pos. 14 and 15 | 1015 102 |
| 2 | Slide gate | 1015 104 |
| 3 | Release trigger | 1014 810 |
| 4 | Screw - M3x6 mm | 1014 812 |
| 5 | Compression spring | 1014 813 |
| 6 | Connector (conveying air) - NW 5.5 | 1004 366 |
| 7 | Connector (supplementary air) - NW 5.5 | 1004 367 |
| 8 | O-ring - Ø 11x1.5 mm | 1000 532 |
| 9 | Filter element | 1015 832 |
| 10 | Body (red) | 1015 835 |
| 11 | Body (black) | 1015 836 |
| 12 | Cartridge - complete | 1016 561# |
| 13 | Hose connection - complete (incl. pos. 13.1) | 1014 806 |
| 13.1 | O-ring - Ø 13x1.5 mm | 1023 234# |
| 14 | O-ring - Ø 16x2 mm | 1007 794# |
| 15 | Axial gasket - complete | 1014 814 |
| 21 | Conveying air hose - Ø 8/6 mm (red) | 103 500* |
| 22 | Supplementary air hose - Ø 8/6 mm (black) | 1008 038* |
| 23 | Quick release coupling for conveying air hose - NW5-Ø 8 mm | 261 645 |
| 24 | Quick release coupling for supplementary air hose - NW5-Ø 8 mm | 261 637 |
| 25 | Kink protection | 1008 844 |
| Powder hose - 66 type, POE, Ø 16/11 mm, with conductive strip (standard) | 105 139*# | |
| Powder hose - 74 type, POE, Ø 15/10 mm, with conductive strip | 1001 673*# | |
| Powder hose - 75 type, POE, Ø 18/12 mm, with conductive strip | 1001 674*# |
| Powder type | Epoxy/polyester |
|
Powder hose Ø (mm)
|
11
|
|
Type of powder hose
|
POE with guide strips
|
|
Input pressure OptiStar (bar)
|
5.5
|
|
Correction value C0
|
Powder output zeroing adjustment
|
| Fault | Cause | Corrective action |
|
The gun does not
spray powder
although the
control unit is
switched on
|
Injector nozzle,
check valve unit,
powder hose or
powder gun are
clogged
|
Clean the
corresponding parts
and if necessary,
replace them
|
|
Gun achieving only
poor spray profile
|
Conveying vacuum
too low
|
Increase the powder
quantity and/or total
air volume on the
control unit
|
|
Cartridge worn,
clogged or not
inserted
|
Replace or install the
cartridge.
|
Usually we delivery in 3 working days after we receive you payment. Pack in wooden or catron box, and ship by air or by sea.
Shipping method is express delivery.
Our company Litone coating have 4 method to transport.
1. air transport the product arrive in airport and you should go to the airport to take your product
2. land transportation the product arrive in train or bus station and you should go to the there to take your product
3. ocean shipping the product arrive in shipside and you should go to the there to take your product
4. International express the machine can arrive the designated place you need not go to port to take your product.
And under 50kg we suggest use express over 50kg you would choose the most suitable shipping for yourself.
We are a typical Chinese supplier and specialized in the research, development and production of powder coating system and liquid painting system. Our products include the booth, hopper, powder coating machine/unit, electrostatic spray gun, panel controller, cascade, PCB , powder injector/pump, powder hose, filter and other parts and so on.
In addition, we can make all kinds of cascade, like international well-know brand.
We not only supply the high-quality coating equipment, but also the best service.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Q1:How long your delivery time?
Generally 3-10 workdays after payment
Q2:What is your term of payment?
Multiple ,We can discuss each other .Such as paypal, T/T,MoneyGram,Western Union,Alipay, L/C etc.
Q3:What is your pre-sales service?
*Enquiry and cousulting support.
*Technology solution and quotation
*Customer visit our company and check our production .
Q4:Where is your company? Can visit?
Yes.of course .We are located in Huixiandasha,Jiankang,Street Gaoxin District .Weifang City ,Shandong Province China
Q5:Could you provide the design for me?
Absolutely .We would like to provide the design for my customer. Just let me know product information and your requirements like product size ,picture material and output field etc.We will make a layout according your requirements.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}