| After-sales Service: | One Year |
|---|---|
| Warranty: | One Year |
| Type: | Coating Production Line |
| Samples: |
1000pcs
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
CG08 SOLENOID VALVE-Ø 8-Ø 8mm 1003914
Find excellent quality parts of control unit CG08 from one of the largest manufacturers and suppliers - LITONE, which has been dedicated to this field for years.
Leveraging on advanced equipment and superior techniques, we can offer you parts of control unit CG08 with high accuracy, high efficiency, reliable performance and long lifespan.
Welcome to buy or wholesale our delicate products.
Electrical data
OptiStar CG08(-C)
|
Nominal input voltage |
100-240 VAC |
|
Frequency |
50-60 Hz |
|
Connected load |
40 VA |
|
Nominal output voltage (to the gun) |
12 V |
|
Nominal output current (to the gun) |
1.2 A |
|
Temperature range |
0°C - +40°C (+32°F - +104°F) |
|
Max. surface temperature |
85 °C (+185 °F) |
Pneumatic data
|
Compressed air connection |
Quick coupling |
|
Input pressure (must be set in the system parameter P2) |
5.5 bar |
|
Max. input pressure |
10 bar / 145 psi |
|
Min. input pressure (while unit in operation) |
5.5 bar / 80 psi |
|
Max. water vapor content of the compressed air |
1.3 g/m³ |
|
Max. oil vapor content of the compressed air |
0.1 mg/m³ |
| Front plate - complete (pos. 1-12) | 1009 860 | |
| Front plate with foil keyboard (pos. 5-8) | 1009 859 | |
| 1 | OptiStar Mainboard V2.0 - complete | 1009 844 |
| 2 | Spacer sleeve - Ø 3.1/6x15 mm | |
| 3 | PCB Powerboard V2.0 | 1009 865 |
| 4 | Spacer sleeve - Ø 3.2/6x7 mm | |
| 5 | Front frame - complete (incl. pos. 5.1) | 1007 048 |
| 5.1 | Special screw | 1007 019 |
| 6 | Special screw - M4x20/7 mm | 1003 000 |
| 7 | Front plate gasket | 1007 042 |
| 9 | Spacer sleeve - Ø 3.6/7x5 mm | |
| 10 | Display | 1007 044 |
| 11 | Washer - Ø 3.2/7x0.5 mm | |
| 12 | Locknut - M3 | |
| 13 | Power pack - 24 VDC | 1009 849 |
OptiStar CG08(-C) - inside rear wall
| 1 | Rear panel gasket | 1007 033 |
| 2 | CAN-Bus Modul - komplett (nur CG08-C) | 1009 068 |
| 3 | Elbow plug-in connection - Ø 8-Ø 8 mm | 230 995 |
| 4 | Solenoid valve - Ø 8-Ø 8 mm, NW 3.4, 24 VDC | 1003 914 |
| 5 | Motor throttle - complete | 1000 064 |
| 6 | Plastic tube - Ø 8/6 mm | 103 152* |
| 7 | Fluidizing pad - 1/8"a | 237 264 |
| 8 | Cap screw - M4x16 mm | 216 801 |
1.Application: used for the powder coating and line, plant.
2.Shipping: can ship to any port by sea, air or courier.
3.Payment methods: T/T, L/C, Western Union, MoneyGram,PayPal.
4.Packing: proper packing suitable for container loading.
5.Services: we supply all kinds of equipments about the powder coating,such as booth,hopper,powder coating machine/unit,electrostatic spray gun ,panel controller,HV cascade,PCB,powder injector/pump ,powder hose,filter and other parts and so on.
Usually we delivery in 5-14 working days after we receive you payment. Pack in wooden or catron box, and ship by air or by sea.
Shipping method is express delivery.
Our company Litone coating have 4 method to transport.
1. air transport the product arrive in airport and you should go to the airport to take your product
2. land transportation the product arrive in train or bus station and you should go to the there to take your product
3. ocean shipping the product arrive in shipside and you should go to the there to take your product
4. International express the machine can arrive the designated place you need not go to port to take your product.
And under 50kg we suggest use express over 50kg you would choose the most suitable shipping for yourself.
Weifang Litone Machinery CO.,Ltd.
Litone Machinery Co., Ltd. is a leading supplier in the field of electrostatic powder coatings worldwide.
From simple manual coating to fully automatic powder coating, our company provides solutions that can meet the high requirements of customers from all over the world in a wide range of industrial fields.
These technologically advanced, high-quality equipment and systems are developed and manufactured at Litone's headquarters in Weifang, China.
Customers can use the most advanced coating laboratory for coating experiments.
These findings are then integrated into the design of complex coating systems to tailor solutions for customers. Affiliated companies in Germany, the United Kingdom, the United States, Italy, France, India, Spain and Mexico and an extensive international distributor network in more than 60 countries/regions sell products to a wide range of industrial users.
For the powder sprayer, the powder loading rate is particularly important.
The reason why we can keep our machine powder spraying rate superior to most other suppliers is based on the following reasons:
1. Gun body and cascading shell materials: We use anti-static materials to protect the high voltage when passing through the gun body.
2. Nozzle resistance: We use glass glaze resistance instead of paper film resistance, which can transmit voltage more accurately and has a longer life (that is why the life of our nozzle is 3-4 times longer than that of other nozzles)
3. Gun cable: If we use cheap cables, when the voltage is reduced by 5% from the control unit, we use cables with shielded wires to keep the voltage high.
4. Filter: We use airtac filter (not a cheap brand), which can spray clear air
5. Fuel injector: We use wear-resistant materials to extend the service life.
So if you want high quality powder spraying machine, please contact us.
If you are interested in any of products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationsships with ne
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}