OptiGun GA02 Flat Nozzle-complete 1000 047
Advantage:
1 Nozzle housing and nozzle housing are made of special material
2 It has excellent chemical stability, corrosion resistance, high lubricity, non-stickiness, electrical insulation and good aging resistance
3 There is a conductive ring at the bottom of the shell, which plays a conductive role and can protect the nozzle well
4 The resistor adopts glass glaze resistor, which has good conductive function
OptiGun 2-A(X) Automatic powder gun
| 1 |
Powder cooating nozzle |
| 2 |
Threaded sleve |
| 3 |
Shaft with removable high voltage cascade |
| 4 |
SuperCorona ring |
| 5 |
Powder gun attachment |
| 6 |
Powder tube |
| 7 |
Clamping sleeve |
OptiGun 2-A Automatic powder gun - complete
| |
OptiGun 2-A Automatic powder gun - complete, negative polarity, incl. pos. 1-6 |
393 568 |
| |
OptiGun 2-A Automatic powder gun - complete, positive polarity, incl. pos. 1-6 |
393 576 |
| 1 |
Powder gun body OptiGun 2-A - complete, negative polarity |
393 649 |
| |
Powder gun body OptiGun 2-A - complete, positive polarity |
393 657 |
| 2 |
Threaded sleeve - see "Nozzle combinations" spare parts list |
|
| 3 |
Flat jet nozzle - see "Nozzle combinations" spare parts list |
|
| 4 |
Gun cable - complete, 20 m (65.61 ft), see also "Gun cable" spare parts list |
393 827 |
| 5 |
Parts set (not shown), consisting of: |
385 670 |
| |
Cable binder with Velcro closure |
303 070 |
| |
Cylinder screw - M8x50 mm |
235 113 |
| |
Cap screw - M4x5 mm |
216 763 |
| |
Washer - Ø 8.4/20x2 mm |
215 880 |
| |
Quick release coupling - NW5, Ø 6 mm |
200 840 |
| 6 |
Cleaning brush - Ø 12 mm (not shown) |
389 765 |
| 7 |
Powder hose - Ø 16/11 mm (not shown) |
103 012* |
| 8 |
Rinsing air hose - Ø 6/4 mm (not shown) |
103 144* |
OptiGun 2-A Automatic powder gun - gun body
| 1 |
OptiGun 2-A shaft - complete, negative polarity (see "Shaft" spare parts list) |
393 665 |
| |
OptiGun 2-A shaft - complete, positive polarity (see "Shaft" spare parts list) |
393 673 |
| 2 |
Powder tube - complete |
385 182# |
| 3 |
Powder gun attachment |
382 817 |
| 4 |
Clamp sleeve |
358 584 |
| 5 |
Hose connection - complete |
362 670# |
| 5.1 |
O-ring for pos. 5 (not shown) |
232 670# |
| # Wearing part |
OptiGun 2-A Automatic powder gun - shaft
| 1 |
Cascade - complete, negative polarity |
393 703 |
| 1 |
Cascade - complete, positive polarity |
393 711 |
| 2 |
Adaptor - complete, incl. pos. 2.4 and 2.5 |
385 158 |
| 2.4 |
Screw-in nipple - 1/8"a, Ø 6 mm |
251 542 |
| 2.5 |
Plug cap - 1/8"a |
265 560 |
| 3 |
Adaptor piece - complete, incl. pos. 3.3 |
385 069 |
| 3.3 |
Pan head screw - M4x6 mm |
267 139 |
| 4 |
Shaft (without cascade) |
393 681 |
| 5 |
Hollow screw |
382 680 |
| 6 |
Gasket |
382 698 |
OptiGun 2-AX Automatic powder gun - complete
| |
OptiGun 2-AX Automatic powder gun - complete, negative polarity, incl. pos. 1-5 |
|
| |
OptiGun 2-AX Automatic powder gun - 1650 |
393 509 |
| |
OptiGun 2-AX Automatic powder gun - 1450 |
393 517 |
| |
OptiGun 2-AX Automatic powder gun - 1250 |
393 525 |
| |
OptiGun 2-AX Automatic powder gun - 1050 |
393 533 |
| |
OptiGun 2-AX Automatic powder gun - 850 |
393 541 |
| |
OptiGun 2-AX Automatic powder gun - 650 |
393 550 |
| 1 |
OptiGun 2-AX Automatic powder gun body - complete, negative polarity, see "OptiGun |
|
| 2 |
AX Automatic powder gun - gun body" spare parts list |
379 166 |
| 3 |
Flat jet nozzle - complete, see "Nozzle combinations" spare parts list |
|
| 4 |
Gun cable - complete, 20 m (65.61 ft), see also "Gun cable" spare parts list |
393 827 |
| 5 |
Parts set (not shown), consisting of: |
385 662 |
| |
Cable binder with Velcro closure |
303 070 |
| |
Pan head screw - M4x6 mm |
267 139 |
| |
Quick release coupling - NW5, Ø 6 mm |
200 840 |
| 6 |
Powder hose - Ø 16/11 mm (not shown) |
103 012* |
| 7 |
Rinsing air hose - Ø 6/4 mm (not shown) |
103 144* |
| * Please indicate length |
OptiGun 2-AX Automatic powder gun - gun body
| |
Powder gun body OptiGun 2-AX - complete, negative polarity |
|
| |
OptiGun 2-AX - 1650, L = 1646 mm (64.80 in) |
393 584 |
| |
OptiGun 2-AX - 1450, L = 1446 mm (56.93 in) |
393 592 |
| |
OptiGun 2-AX - 1250, L = 1246 mm (49.05 in) |
393 606 |
| |
OptiGun 2-AX - 1050, L = 1046 mm (41.18 in) |
393 614 |
| |
OptiGun 2-AX - 850, L = 846 mm (33.30 in) |
393 622 |
| |
OptiGun 2-AX - 650, L = 646 mm (25.43 in) |
393 630 |
| 1 |
OptiGun 2-A shaft - complete, negative polarity (see spare parts list "Shaft") |
393 665 |
| 2 |
Powder tube - complete, without pos. 4 |
|
| |
OptiGun 2-AX - 1650 |
385 255# |
| |
OptiGun 2-AX - 1450 |
385 344# |
| |
OptiGun 2-AX - 1250 |
385 352# |
| |
OptiGun 2-AX - 1050 |
385 360# |
| |
OptiGun 2-AX - 850 |
385 379# |
| |
OptiGun 2-AX - 650 |
385 387# |
| 3 |
Extension tube |
|
| |
OptiGun 2-AX - 1650 |
384 682 |
| |
OptiGun 2-AX - 1450 |
385 441 |
| |
OptiGun 2-AX - 1250 |
385 450 |
| |
OptiGun 2-AX - 1050 |
385 468 |
| |
OptiGun 2-AX - 850 |
385 476 |
| |
OptiGun 2-AX - 650 |
385 484 |
| 4 |
Clamping part |
358 584 |
| 5 |
Hose connection - complete |
362 670# |
| 5.1 |
O-ring for pos. 5 (not shown) |
232 670# |
| # Wearing part |
Gun cable
| |
Gun cable - complete, 11 m (36.09 ft) |
393 800 |
| |
Gun cable - complete, 15 m (49.21 ft) |
393 819 |
| |
Gun cable - complete, 20 m (65.61 ft) |
393 827 |
| |
Extension cable - complete, 5 m (16.40 ft) |
334 464 |
| |
Extension cable - complete, 10 m (32.80 ft) |
394 840 |
| |
Cable socket for extension cable |
206 504 |
| |
Cable plug for extension cable |
200 085 |
| 9 |
Cover tube |
360 317 |
| 11 |
Countersunk head screw - M2x4 mm |
257 958 |
| 12 |
Cylinder screw - M5x6 mm |
263 907 |
| 13 |
O-ring - Ø 10.82x1.78 mm |
232 556 |
| 14 |
O-ring - Ø 7.65x1.78 mm |
232 564 |
| 15 |
O-ring - Ø 8.1x1.6 mm |
263 818 |
| 21 |
Stuffing box - PG7 with kink protection |
208 426 |
| 22 |
Cable - 2x0.75 mm², shielded |
103 454* |
| 23 |
Connecting plug - 7-pin |
200 085 |
| * Please indicate length |
Nozzle combinations - NF08
| |
Nozzle set - flat jet, NF08, pos. 1, 2 |
1000 047# |
| |
Nozzle set - round jet, pos. 5, 6, 9 |
382 922 |
| 1 |
Electrode holder (flat jet nozzle) |
1000 055## |
| 2 |
Flat jet nozzle |
1000 049## |
| 3 |
Threaded sleeve |
379 166 |
| 5 |
O-ring - Ø 5x1 mm |
231 606# |
| 6 |
Round jet nozzle |
378 518# |
| 7 |
Deflector plate - Ø 16 mm (0.63 in) |
331 341# |
| 7.1 |
Deflector plate - Ø 24 mm (0.94 in) |
331 333# |
| 7.2 |
Deflector plate - Ø 32 mm (1.26 in) |
331 325# |
| 8 |
Extension - 150 mm (5.91 in) |
378 852# |
| 8.1 |
Extension - 300 mm (11.82 in) |
378 860# |
| 9 |
Electrode holder, incl. pos. 5 (round jet central electrode) |
382 914# |
| # Wearing part |
Packing & Delivery
Within 3 sets, we recommend the air shipping / express delivery, such as, FEDEX, UPS, DHL, ARAMEX, DPEX, etc
Usually 7-12days, it can arrive your door More than 3 sets, we recommend the sea shipping, it has higher cost performance.
If shipping by sea, we will provide waterproof packaging, also can provide the wooden case packing according to the request.
Litone Machinery Co., Ltd. is a leading supplier in the field of electrostatic powder coatings worldwide.
From simple manual coating to fully automatic powder coating, our company provides solutions that can meet the high requirements of customers from all over the world in a wide range of industrial fields. These technologically advanced, high-quality equipment and systems are developed and manufactured at Litone's headquarters in Weifang, China. Customers can use the most advanced coating laboratory for coating experiments.
These findings are then integrated into the design of complex coating systems to tailor solutions for customers. Affiliated companies in Germany, the United Kingdom, the United States, Italy, France, India, Spain and Mexico and an extensive international distributor network in more than 60 countries/regions sell products to a wide range of industrial users.
1 Is it safe to order from Litone?
Yes,100% sure you are safe to order from us. Litone exported to many countries and we are the famous factory produce powder coating equipment more than 10 years in China.And successfully exported to more than 60 countries and regions.
2 Can I customized the machines?
Yes, we are a professional team for powder coating equipments, Our technician will design for you specially according to your needs and your factory, workpiece etc information.
3 What is this type of machine used for?
It used for the powder coating and line, plant.
4 How we ship goods?
Our shipping methods include sea and air to any port.
5 What is our billing method?
Our Payment methods: T/T, L/C, Western Union, PayPal,Xtransfer, etc
6 What does our packaging look like?
Our packaging is the appropriate packaging for the container.
Audited Supplier 
){kind=link}
){kind=link}