| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 770/Set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1 Small and portable,mostly used in experimental places
2 Current and voltage can be set separately, wider application range
3 Powder charging rate:60%-80%
General information
1. The powder spraying equipment should only be started up and
used once the operating instructions have been carefully studied.
Improper use of the controlling device can lead to accidents, malfunction or damage to the control itself. 2. Before every start-up check the equipment for operational safety
(regular servicing is essential)!
3. Safety precautions specified by local legislation must be observed. 4. The plug must be disconnected before the machine is opened for
repair. 5. The plug and socket connection between the powder spraying
equipment and the mains network should only be taken out when
the power is switched off. 6. The connecting cable between the controlling device and the spray
gun must be set up so that it cannot be damaged during operation. Safety precautions specified by local legislation must be observed!
7. Before starting work familiarize yourself with all installations and
operating elements, as well as with their functions!
Typical characteristics
Litone-02C lab powder coating machine can be easily dismantled and is
therefore maintenance and repair-friendly.
Continuous, tightly sealed gun body with separte channels for
cascade and rinsing air
Powder tube coupling with quick-release fastener
Covered hose and cable ducting
Excellent access to the connections due to snap lock
Easily dismantlable by a few hand movements, therefore very easy
to service
Few wear parts ( nozzle )
Easily removable cascade because free of grease, with integrated
current limiting resistors
Scope of delivery
Litone-02C lab powder coating control unit
Litone GLQ-L-1B Manual powder coating gun
200ml powder cup
Air hose
4m cable
Filter
Parts set
Safety requirements for electrostatic powder coating
If operated according to these operating instructions, the equipment is dangerous
Failure to follow the manual. All static conductive components, especially machinery within 5 meters of the coating equipment, must be grounded.
2. The ground in the coating area must be conductive (normally concrete is conductive).
3. Operators must wear conductive clothing and footwear
4. Operators should hold guns with their hands. If gloves are worn, they must also conduct electricity.
5. The accompanying grounding wire must be connected to the screw of the electrostatic powder spraying handheld device at the grounding end. The grounding wire must have a good metal connection with the grounding wire. The coating room, recycling device, and conveyor chain must also have a good connection with the grounding wire
The suspension arrangement of objects.
6. It is necessary to set up a power supply and gunpowder supply for handguns to fully protect them from heat and chemical damage.
The powder spraying device can only be started in the following situations: the booth has already been started. If the booth is cut off, the powder coating device must be turned off.
8. All conductive devices must be checked for grounding conditions
| DIMENSIONS | |
| Size | 320mm*320mm*180mm |
| Weight | 39kg |
| PNEUMATIC DATA | |
| Min.input pressure (dynamical): | 5bar |
| Max. input pressure: | 8 bar |
| Max. water vapor content: | 1.3g/m3 |
| Max.oil vapor content: | 0.1mg/m3 |
| Max.compressed air consumption: | 19Nm3/h |
| ELECTRICAL DATA | |
| Input voltage: | 220v(100v-240v) |
| Frequency: | 50-60Hz |
| ENVIRONMENTAL DATA | |
| Temperature range: | 10ºC-40ºC |
Litone Wear-Resistant and Hot Selling Powder Coating Machine/Equipment L-01C |
Litone Hot Selling and Wear-Resistant Powder Coating Machine L-01F |
Spraying equipment is widely used in all walks of life.
Spraying equipment can be used for large-scale station steel structures, large-scale road overpass steel structure pavement, ships, trailers, trains, automobiles, bridges, tunnels, shelves, colored tiles, building interior and exterior walls, furniture, petrochemical, marine engineering, aerospace, aviation, Products and engineering coatings in industrial fields such as blast furnace inner walls and pipeline inner walls in steel plants.
We are a typical chinese supplier and specialized in the production of powder coating system and liquid painting system. our products include the booth ,hopper,powder coating machine /unit, electrostatic spary gun, panel controller, cascade, PCB board , powder injector/pump, powder hose, filter and other parts and so on.
If you are interested in any of our products or would like to discuss a custom order, please feel to contact us. we are looking forward to forming successful business relationships with new clients around the world in the near future.
1 Is it safe to order from Litone?
){kind=link}