| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Optional Nozzle Installation
WARNING: Turn off the electrostatic voltage and ground the spray gun electrode before performing the following tasks. Failure to observe this warning could result in a severe shock.
See Figure 3-2. The spray gun is shipped with a flat spray nozzle installed.
Follow these instructions to install a conical nozzle in place of the flat spray nozzle:
1. Disconnect the feed hose (1) from the pump.
2. Blow out the feed hose and spray gun with low-pressure compressed air.
3. Wipe the powder off the exterior of the spray gun with a clean, dry cloth.
4. Remove the flat spray nozzle (6) from the inlet adapter (2).
5. Clean the inlet adapter with a clean, dry cloth.
6. Install the conical nozzle and pattern adjuster sleeve (4) assembly on the inlet adapter. The conical nozzle fits onto the inlet adapter; the pattern adjuster slides over the nozzle.
7. Install the deflector (5) on the electrode holder (3), making sure you do not bend the electrode.
|
Output Voltage and Current
|
|
|
Maximum rated output voltage at the electrode
|
95 kV + 10%
|
|
Maximum rated output current at the electrode
|
100 uA + 10%
|
|
Air Pressure
|
|
|
Purge air
|
5.5−6.5 bar (80−95 psi at 227−255 l/min (8−9 scfm)
|
|
Gun air
|
0.34 bar (5 psi) 6 l/min (0.2 scfm)
|
|
Minimum input pressure
|
4.13 bar (60 psi)
|
|
Maximum input pressure
|
6.89 bar (100 psi)
|
These findings are then integrated into the design of complex coating systems to tailor solutions for customers.
Affiliated companies in Germany, the United Kingdom, the United States, Italy, France, India, Spain and Mexico and an extensive international distributor network in more than 60 countries/regions sell products to a wide range of industrial users.
){kind=link}