| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Daily Maintenance
1. Disconnect the powder feed hose from the pump. Point the spray gun into the booth and blow the powder out of the hose and spray gun with low-pressure compressed air. Never blow air through the powder feed hose from the spray gun into the pump.
2. See Figure 3. Remove the nozzle parts (items 4−6) from the spray gun.
3. Loosen the set screw (7) and pull the powder inlet body (3) straight off the gun.
4. Clean the parts with a low-pressure air gun. Wipe the parts with a clean, dry cloth.
5. Blow powder off the resistor probe (2) and extension (1). Wipe them with a clean, dry cloth. Carefully remove fused powder from the parts with a wooden or plastic dowel or similar tool. Do not use tools that will scratch the plastic. Powder will build up and impact-fuse on any scratches.
NOTE: If necessary, use a cloth dampened with isopropyl or ethyl alcohol to clean the powder path parts. Remove the O-rings first. Do not immerse the spray gun in alcohol. Do not use any other solvents.
6. Inspect the powder path parts for wear. Replace worn parts.
7. Assemble the spray gun. Rotate items (4), (5), (6), and (8) at least 30° from their previous position to prevent uneven wear and lopsided patterns.
|
Output Voltage and Current
|
|
|
Maximum rated output voltage at the electrode
|
95 kV + 10%
|
|
Maximum rated output current at the electrode
|
100 uA + 10%
|
|
Air Pressure
|
|
|
Purge air
|
5.5−6.5 bar (80−95 psi at 227−255 l/min (8−9 scfm)
|
|
Gun air
|
0.34 bar (5 psi) 6 l/min (0.2 scfm)
|
|
Minimum input pressure
|
4.13 bar (60 psi)
|
|
Maximum input pressure
|
6.89 bar (100 psi)
|
These findings are then integrated into the design of complex coating systems to tailor solutions for customers.
Affiliated companies in Germany, the United Kingdom, the United States, Italy, France, India, Spain and Mexico and an extensive international distributor network in more than 60 countries/regions sell products to a wide range of industrial users.
){kind=link}