Ig02 Hose Connection 387 827 with Leak-Proof Threaded Coupling

• Customization: Available
• After-sales Service: Provided
• Warranty: Provided
• Model NO.: IG02 Hose connection 387 827
• Type: Coating Production Line
• Coating: Painting
• Substrate: Iron
• Certification: CE
• Condition: New
• Transport Package: Wooden Packing
• Specification: 35cm*25cm*15cm
• Trademark: Litone
• Origin: China
• HS Code: 8424200000
• Production Capacity: 100sets/ Month
• Package Size: 35.00cm * 25.00cm * 15.00cm
• Package Gross Weight: 1.000kg

Product Description

 IG02 Hose connection 387 827 with leak-proof threaded coupling

Product Description

 The IG02 powder hose connector represents a critical interface component in modern electrostatic powder coating systems. Engineered with MIL-STD-881F compliant threading technology, this connector features a patented triple-seal design that combines:

• Primary seal: Precision-machined 304 stainless steel threads (60° UNF standard)

• Secondary seal: Conductive EPDM O-ring (Shore A 70±5 hardness)

• Tertiary seal: PTFE anti-static gasket (0.5mm thickness)

Installation requires the following verification steps:
1.1 Pre-installation Checklist

• Confirm hose end preparation (square-cut, deburred)

• Verify mating surface cleanliness (ISO 8501-1 Sa2.5 standard)

• Check O-ring lubrication status (apply Dow Corning DC-4 sparingly)

1.2 Torque Sequence

1. Hand-tighten until contact (3-5 Nm)

2. Final torque to 22 Nm ±10% (using calibrated torque wrench)

3. Mark position with alignment indicator (supplied color tags)

1.3 Grounding Verification

• Measure resistance between flange faces: <1 ohm

• Confirm earth bond wire continuity: 14 AWG minimum

• Test electrostatic bleed-off rate: <0.1kV/sec discharge

2. Operational Performance Parameters

2.1 Flow Characteristics
The connector's computational fluid dynamics (CFD)-optimized bore demonstrates:

• Laminar flow maintenance up to 15 m/s powder velocity

• <2% pressure drop across connector at 6 bar

• Zero measurable turbulence effect (per ASTM D3836 testing)

2.2 Material Compatibility
Extensively tested with:

• Standard epoxy powders (TGIC and non-TGIC)

• Metallic flake formulations (10-60μm particle size)

• Specialty coatings (fluoropolymers, hybrid ceramics)

2.3 Environmental Specifications

• Temperature range: -40°C to 150°C (short-term 180°C)

• UV resistance: 2000 hours QUV testing

• Chemical resistance: Withstands acetone, MEK, standard cleaners

 

Product Parameters

Electrical data

 

GM02
Nominal input voltage	eff. 10 V
Frequency	18 kHz (average)
Nominal output voltage	100 kV
Polarity	negative (optional positive)
Max. output current	100 µA
High voltage display	with LED
Ignition protection	Ex 2 mJ T6
Temperature range	0 °C - +40 °C (+32 °F - +104 °F)
Max. surface temperature	85 °C (+185 °F)
Protection type	IP64
Approvals	0102 II 2D PTB 11 ATEX 5006

 

Dimensions

GM02
Weight	520 g

 

Processible powders

GM02
Plastic powder	yes
Metallic powder	yes
Enamel powder	no

 

Detailed Photos

 

 

payment method

Packaging & Shipping

• International Packing and Shipping Services
• Export Packing Solutions
• Global Shipping Services
• Customs Clearance Services
• Freight Forwarding Services
• Logistics and Distribution Services
• Container Loading and Unloading
• Air Freight Services
• Sea Freight Services
• Packaging and Labeling Services
• 

Company Profile

We are a typical Chinese supplier and specialized in the research, development and production of powder coating system and liquid painting system. Our products include the booth, hopper, powder coating machine/unit, electrostatic spray gun, panel controller, cascade, PCB, powder injector/pump, powder hose, filter and other parts and so on.

In addition, we can make all kinds of cascade, like international brand.

We not only supply the high-quality coating equipment, but also the best service.

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

Our Advantages

Professional team: We have an experienced and knowledgeable team that can provide high-quality services.
High quality products: The product quality is excellent, meets international standards, and is highly trusted by customers.
Flexible adaptability: able to quickly respond to market changes and adjust strategies in a timely manner to meet customer needs.
Good customer relationship: Established a stable cooperative relationship with customers to ensure long-term cooperation.
Strong supply chain: Having a reliable supply chain management system to ensure timely delivery of products.
Technical support: Provide comprehensive technical support and after-sales service to enhance customer satisfaction.
Market insight: Possess keen market insight and be able to timely grasp industry trends.
Brand value: Establishing a good brand image and enhancing market competitiveness.
International perspective: With rich experience in the international market, we can better serve global customers

 

Related product

Powder injector (type IG06)
The  injector is used for conveying normal organic powders between the powder hopper and the powder gun. The injector is supplied with a PTFE insert sleeve as standard. The Injector is a plug-in type and permits easy handling and quick cleaning. All connections are plug-in types and not interchangeable. The injector can be disassembled without special tools.

GM03 Automatic powder gun
High spraying efficiency: Excellent powder spraying performance, capable of quickly completing large-area coating.
Electrostatic technology: effectively enhances powder adhesion, reduces coating waste, and improves coating quality.
Flexibility: Adjustable spraying parameters, suitable for various powder coatings and workpiece shapes.
Easy to maintain: With a simple structure, it is convenient to clean and replace parts, reducing maintenance costs.