| After-sales Service: | One Year |
|---|---|
| Warranty: | One Year |
| Type: | Coating Spray Gun |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier OptiSelect GM03 manual powder gun 1008 070
*Can be replaced with original GM03,
*Supply all spare parts
|
Introduction:
1.aftermarket replacement the high quality electrostatice powder coating gun GM03 , use in the electrostatice powder coating machine , the product made in China .it fit to the GM03 OptiFlex2 electrostatice powder coating machine spray gun . 2. The shell of powder coating gun choose the high quality materials processing; The transparent insulating material be sealed in the cacade ,It can slow down the powder coating gun`s aging ,keep to be insulation, to ensure the electrostatic voltage of the gun nozzle output. 3. Package includes: 1).shell of electrostatice powder coating gun : 1 piece. 2).HV cascade : 1 piece. 3). wire (with 7 pins plug): 1 piece.
4).Warranty time : 12 months.
If need the replacement for the original GM03 OptiFlex2 manual Spray gun, Pls be free to message us
|
We sell a complete set of GM03 powder spraying guns. In addition, we also support ordering for some parts of this set of gun.
You just need to tell me the product No., I will provide a quotation
| # | Name | No. |
A |
OptiSelect GM03 manual powder gun - complete negative polarity, incl. gun cable - 6 m, rinsing air hose - 6 m, flat jet nozzle, brush and parts kit, without powder hose |
1008 070 |
| OptiSelect GM03 manual powder gun - complete positive polarity, incl. gun cable - 6 m, rinsing air hose - 6 m, flat jet nozzle, brush and parts kit, without powder hose |
1008 073 |
|
| B | Manual powder gun shaft OptiSelect GM03 (incl. cascade) with: | |
| Gun cable 2 m, negative polarity (-) | 1007 971 | |
| Gun cable 6 m, negative polarity (-) | 1007 972 | |
| Gun cable 12 m, negative polarity (-) | 1007 973 | |
| Gun cable 2 m, positive polarity (+) | 1007 974 | |
| Gun cable 6 m, positive polarity (+) | 1007 975 | |
| Gun cable 12 m, positive polarity (+) | 1007 968 | |
| 1 | Gun body | 1007 220 |
| 2 | Cascade - complete, negative polarity | 1007 231 |
| Cascade - complete, positive polarity | 1007 232 | |
| 3 | Print holder - complete | 1007 216 |
| 4 | End plate with hook | 1007 217 |
| 5 | Grip - complete (incl. pos. 5.1 and 5.2) | 1007 961 |
| 5.1 | Grub screw - M3x8 mm | 1008 157 |
| 5.2 | Grip sealing | 1007 633 |
| 6 | Trigger - complete | 1007 213 |
| 7 | Trigger cover | 1007 212 |
| 8 | Countersunk-head screw - M4x6 mm | 1000 845 |
| 9 | SuperCorona connection | 1007 238 |
| 10 | Gun cable 2 m - complete | 1007 963 |
| Gun cable 6 m - complete | 1007 964 | |
| Gun cable 12 m - complete | 1007 965 | |
| 11 | Rinsing air connection | 1000 804 |
| 11.1 | Rinsing air hose | 100 854* |
| 12 | Powder tube - complete | 1007 958 # |
| 13 | Compression spring | 1001 488 |
| 14 | Clip ring | 1007 960 |
| 15 | Hose connection Ø 11-12 mm - complete (incl. pos 15.1) | 1001 340 # |
| Hose connection Ø 9-10 mm - complete (incl. pos 15.1) | 1002 030 # | |
| 15.1 | O-ring for pos. 15 | 1000 822 # |
| 16 | Threaded sleeve (see corresponding spare parts list) |
| 17 | Nozzle (see corresponding spare parts list) | |
| 18 | Cascade space gasket | 1007 635# |
| Cleaning brush - Ø 12 mm | 389 765 | |
| Parts set (not shown), consisting of: | 1008 302 | |
| Flat jet nozzle NF21 | 1007 935# | |
| MultiSpray-Adapter NF08 | 1003 634# | |
| Cable clamp | 303 070 | |
| Hose connector - complete, for hose interior Ø 9-10 mm | 1002 030 | |
| Powder hose - Ø 10 mm (not shown) | 1001 673*# | |
| Powder hose - Ø 11 mm (not shown) | 105 139*# | |
|
Technical data of the OptiSelect GM03 manual powder gun |
|
|
Rated input voltage:
|
10 V eff.
|
| Frequency: |
17 kHz.
|
|
Rated output voltage:
|
98 kV.
|
|
Polarity:
|
Negative (Positive - Option).
|
|
Maximum output current:
|
100 µA.
|
|
Flash protection:
|
Type A - according to EN 50177*
|
| FLEX-2B Powder coating machine | FLEX-2C Powder coating machine | GM03 Cascade |
Usually we delivery in 3-7 working days after we receive you payment. Pack in wooden or catron box, and ship by air or by sea.
Shipping method is express delivery.
Our company Litone coating have 4 method to transport.
1. air transport the product arrive in airport and you should go to the airport to take your product
2. land transportation the product arrive in train or bus station and you should go to the there to take your product
3. ocean shipping the product arrive in shipside and you should go to the there to take your product
4. International express the machine can arrive the designated place you need not go to port to take your product.
And under 50kg we suggest use express over 50kg you would choose the most suitable shipping for yourself.
We are a typical Chinese supplier and specialized in the research, development and production of powder coating system and liquid painting system. Our products include the booth, hopper, powder coating machine/unit, electrostatic spray gun, panel controller, cascade, PCB, powder injector/pump, powder hose, filter and other parts and so on.
In addition, we can make all kinds of cascade, like international well-know brand.
We not only supply the high-quality coating equipment, but also the best service.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Q1:How long your delivery time?
Generally 3-10 workdays after payment
Q2:What is your term of payment?
Multiple ,We can discuss each other .Such as Paypal,MoneyGram,Western Union, T/T, L/C etc.
Q3:What is your pre-sales service?
*Enquiry and cousulting support.
*Technology solution and quotation
*Customer visit our company and check our production .
Q4:Where is your company? Can visit?
Yes.of course .We are located in Weifang City ,Shandong Province, China
Q5:Could you provide the design for me?
Absolutely .We would like to provide the design for my customer. Just let me know product information and your requirements like product size ,picture material and output field etc. We will make a layout according your requirements.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}