| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | Provided |
|
Still deciding? Get samples of US$ 800/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Gemmas OptiStar CG07Manual gun control unit 1001 060
Field of application
The OptiStar CG07 Manual gun control unit is designed exclusively for controlling the ITW Gema powder coating guns (see also in chapter "Technical Data"). Any other use, beyond the above mentioned is considered nonconforming. The manufacturer is not responsible for any damage resulting from this; the risk for this is assumed by the user alone. For a better understanding of the relationships in powder coating, it is recommended to read the operating instructions of other components, thoroughly, so as to be familiar with their functions also.
Typical characteristics
The OptiStar CG07 Manual gun control unit is used for electrostatic powder coating with OptiFlex manual equipment (fluidizing-, box- or stirrer device)
- The OptiStar CG07 Manual gun control unit allows the configuration of process parameters (air settings, high voltage settings), system parameters, process data, status information and the powder hose correction values. All air volumes can be controlled centrally by the unit
- The handling is simple and self-explanatory
- The coating personnel can save individual settings based off personnel experience
- All settings for efficient powder coating are simple to operate and repeatable. The control unit electronics permit the exact V 10/07 16 • Function description OptiStar CG07 Manual gun control unit amount of powder delivery and the adjusted values can be read on the digital displays
- The OptiStar CG07 Manual gun control unit can be connected to all usual mains voltages between 100-240 VAC, 50-60 Hz, single phase
- Attention - the vibrating motor requires 100/110/220 VAC depending on country mains supply
| Electrical data | |
| Nominal input voltage: | 100V-240VAC |
| Frequency: | 50-60 Hz |
| Protection type: | IP54 |
| Temperature rang: | 0ºC to +40ºC(+32ºF to +104ºF) |
| Pneumatical data | |
| MAX.input pressure: | 10bar/145psi |
| MIN.input preseure: | 6bar/87psi |
| Max.water vapor content of the compressed air: | 1.3g/m³ |
| Max.oil vapor content of the compressed air: | 0.1mg/m³ |
| Max.compressed air consumption: | 11Nm³/h |
| MIN.input pressure: | 5.5bar/80psi |
| Gun paramter | |
| Input: | 0~15VDC |
| Voltage Frequency: | Around 20KHZ |
| Input Current: | <0.5A |
| Outout Voltage: | 15~100KV negative |
| Max. Output powder volume: | Around 600G/MIN |
| Gun cable: | 4M |
| Gun weight: | 425g |
We are a typical Chinese supplier and specialized in the research, development and production of powder coating system and liquid painting system. Our products include the booth, hopper, powder coating machine/unit, electrostatic spray gun, panel controller, cascade, PCB, powder injector/pump, powder hose, filter and other parts and so on.
In addition, we can make all kinds of cascade, like international brand.
We not only supply the high-quality coating equipment, but also the best service.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
We provide the following after-sales services.
1. Warranty service: Provide the warranty period and specific warranty content of the product, including free repair, replacement of parts, etc.
2. Maintenance service: Regular maintenance and inspection of products to ensure their normal operation.
3. Technical Support: Provide consumers with technical consultation and support during the use of the product, helping to solve problems encountered during use.
4. Training services: Provide consumers with training on product usage, enabling them to proficiently operate and maintain the product.
5. Follow up service: Conduct after-sales satisfaction surveys and follow-up visits to consumers, timely understand their opinions and suggestions, and improve service quality.
6 Complaint Handling: Timely and effective handling and feedback of consumer complaints to improve consumer satisfaction.
1.Application: used for the powder coating and line, plant.
2.Shipping: can ship to any port by sea, air or courier.
3.Payment methods: T/T, L/C, Western Union, PayPal,MoneyGram, escrow.
4.Packing: proper packing suitable for container loading.
5.Services: we supply all kinds of equipments about the powder coating,such as booth,hopper,powder coating machine/unit,electrostatic spray gun ,panel controller,HV cascasde,PCB,powder injector/pump ,powder hose,filter and other parts and so on.
){kind=link}