| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Type: | Coating Spray Gun |
| Samples: |
stock
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Daily maintenance:
1. Clean the gun, see chapter "Cleaning" Weekly maintenance
2. Clean the powder hopper, injector and powder gun. Only fill the powder hopper before resumption of operation
3. Check the grounding connections of the coating booth, the suspension devices of the work pieces, or the conveyor chain
General information
Gemas powder coating equipment is designed with safety in mind and built according to the latest technical specifications. this
Hazards may arise if the equipment is not used for its intended purpose.
It should therefore be noted that there is a danger to life, limbs of the user or third parties, a risk of damage to the device and other machinery belonging to the user and posing a hazard to the efficient operation of the device.
1. Dust spray equipment should only be used after it has been switched on and the operating instructions have been carefully studied.
Improper use of the controls may result in accidents, malfunctions or damage to the controls themselves.
2. Check the operation safety of the equipment before starting each time
(Regular maintenance is very important)!
3. Safety regulations BGI 764 and VDE regulations DIN VDE 0147, Part 1 must be complied with for safe operation.
4. Safety precautions prescribed by local law must be followed.
5. Before starting the machine, the plug must be unplugged for maintenance.
6. The connection between the plug and the socket is sprayed with powder
Devices and mains networks should only be removed if: The power supply is switched off.
7. The connecting cable between the control device and the controller
The installation of the spray gun must ensure that the spray gun will not be damaged during use
8. Only use original Gemas spare parts, as this also preserves the explosion protection. damage
Damage caused by other parts is not covered by the warranty.
9. If Gemas powder coating equipment differs from other manufacturers' machines, then their safety regulations must also take this into account.
10.Before starting work, familiarize yourself with all installation and operating elements and their functions! It's too late to familiarize yourself with the operation process!
11. Care must be taken when using powder/air mixtures! Powder/air mixture in proper concentration is flammable! Smoking is prohibited in the entire factory area!
12. As a general rule for all powder spray devices when using a pacemaker, never enter high voltage areas with electromagnetic fields. Persons with pacemakers should not enter areas with powder spray equipment!
| A | OptiSelect manual powder gun - complete negative polarity, incl. gun cable - 6 m, rinsing air hose - 6 m, flat jet nozzle, brush and parts kit, without powder hose |
1002 100 |
| OptiSelect manual powder gun - complete positive polarity, incl. gun cable - 6 m, rinsing air hose - 6 m, flat jet nozzle, brush and parts kit, without powder hose |
1002 101 | |
| B | OptiSelect manual powder gun shaft (incl. cascade) | |
| Negative polarity (-) | 1001 891 | |
| Positive polarity (+) | 1001 892 | |
| C | Cascade (negative polarity) - complete | 1000 809 |
| Cascade (positive polarity) - complete | 1002 031 | |
| 1 | Gun body | 1001 155 |
| Handle - complete set (pos. 5, 6, 7 and 8) | 1000 807 | |
| 2 | Trigger - complete (incl. pos. 2 and 3) | 1001 341 |
| 3 | Compression spring - 0.36x4.2x49.4 mm | 1001 487 |
| 4 | Trigger cover | 1000 801 |
| 5 | Grasp termination | 1000 806 |
| 6 | Radial gasket | 1000 803 |
| 7 | Gun cable - L=6 m, complete | 1001 528 |
| Extension cable for gun cable - L=6m, incl. safety clamp | 1002 161 | |
| Extension cable for gun cable - L=14m, incl. safety clamp | 1002 162 | |
| 8 | Grub screw - M3x8 mm | 1000 844 |
| 10 | Powder tube - complete | 1001 339 |
| 10.2 | O-ring - Ø 12x1.5 mm | 1000 822 |
| 11 | Rinsing air connection | 1000 804 |
| 12 | Clip ring | 1000 898 |
| 13 | Compression spring | 1001 488 |
| 14 | Back cover - complete | 1000 617 |
| 14.1 | Printed circuit board holder - complete (incl. pos. 14.2) | 1002 029 |
| 14.2 | Radial gasket | 1000 795 |
| 14.3 | Shield - complete | 1002 028 |
| 14.4 | Cap screw - M3x8 mm (not shown) | 202 363 |
| 15 | Hose connection - complete, for internal hose Ø 11-12 mm | 1001 340 |
| Hose connection - complete, for internal hose Ø 9-10 mm | 1002 030 | |
| 15.2 | O-ring - Ø 12x1.5 mm | 1000 822 |
| 16 | Hook (replaceable) | 1000 877 |
| 17 | Countersunk head screw - M4x8 mm, plastic | 263 516 |
| 18 | PT-screw | 1000 843 |
| 19 | Threaded sleeve - complete | 1000 948 |
| 20 | Flat jet nozzle - complete | 1000 047 |
| 20.1 | Electrode holder - complete | 1000 055 |
| 20.2 | Flat jet nozzle | 1000 049 |
| OptiSelect adaptor for PGC control unit (not shown) | 1001 952 | |
| Cleaning brush - Ø 12mm | 389 765 | |
| Parts set (not shown), consisting of: | 1002 359 | |
| Round jet nozzle - NS02, complete | 382 922 | |
| Cable clamp | 303 070 | |
| Deflector plate - Ø 16 mm | 331 341 | |
| Deflector plate - Ø 24 mm | 331 333 | |
| Deflector plate - Ø 32 mm | 331 325 | |
| Hose connection - complete, for internal hose Ø 11-12 mm | 1001 340 | |
| O-ring - Ø 12x1.5 mm | 1000 822 | |
| Countersunk head screw - M4x8 mm, plastic | 263 516 | |
| Powder hose - Ø 10 mm (not shown) | 1001 673 | |
| Powder hose - Ø 11 mm (not shown) | 105 139 |
Within 3 sets, we recommend the air shipping / express delivery, such as, FEDEX, UPS, DHL, ARAMEX, DPEX, etc
Litone Machinery Co., Ltd. is a leading supplier in the field of electrostatic powder coatings worldwide. From simple manual coating to fully automatic powder coating, our company provides solutions that can meet the high requirements of customers from all over the world in a wide range of industrial fields.
These technologically advanced, high-quality equipment and systems are developed and manufactured at Litone's headquarters in Weifang, China. Customers can use the most advanced coating laboratory for coating experiments. These findings are then integrated into the design of complex coating systems to tailor solutions for customers. Affiliated companies in Germany, the United Kingdom, the United States, Italy, France, India, Spain and Mexico and an extensive international distributor network in more than 60 countries/regions sell products to a wide range of industrial users.
1 Is it safe to order from Litone?
Yes,100% sure you are safe to order from us. Litone exported to many countries and we are the famous factory produce powder coating equipment more than 10 years in China.And successfully exported to more than 60 countries and regions.
2 Can I customized the machines?
Yes, we are a professional team for powder coating equipments, Our technician will design for you specially according to your needs and your factory, workpiece etc information.
3 What is this type of machine used for?
It used for the powder coating and line, plant.
4 How we ship goods?
Our shipping methods include sea and air to any port.
5 What is our billing method?
Our Payment methods: T/T, L/C, Western Union, PayPal,Xtransfer, etc
6 What does our packaging look like?
Our packaging is the appropriate packaging for the container.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}