| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 18/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Details:
| Failure | Possible Failure Reason | Solution |
| Powder Paint is being blown from the gun but the paint doesn't hold on the material. (No High Voltage Output) | 1. The material is not earthed 2. The kV parameter is set to 0 3. The signal from the gun does not reach to the Cascade. |
1. Earth the material or improve the grounding. 2. Set the kV parameter above 0 3. Check the connection between the gun Cascade and the Socket Group for a possible short circuit inside the gun. |
| The gun trigger is working and the High Voltage is working but there is no powder output. |
1. Blockage in the powder route 2. Tearing or disconnection between the injector and the control unit. |
1. Remove the blockage in the powder route. 2. Change the Air or Powder Ratio other than 0 on the control unit. 3. Remove the blockage or fix the disconnection. |
| There isn't any output High Voltage or Powder Output. |
1. Gun cable is disconnected. 2. Gun cable is damaged 3. Short Circuit or damage in the Gun Trigger grouping |
1. Plug the cable. 2. Check for the damage or change the cable 3. Check the grouping for short circuit or damage and change the trigger group if needed. |
| The interface buttons are not working as intended. |
1. The Control Unit front panel membrane has a short circuit or damaged. 2. The Control Unit is not correctly configured. |
1. Change the keypad of the membrane. 2. Check the entire configuration of the Control Unit and redo the configuration if needed. |
| The rotary Knob is not changing any values on the screen. |
1. The segment is not chosen. 2. The Knob is damaged. |
1. Please select the segment that you want to change. 2. Change the Rotary Knob. |
| Part # | Order Code | Part Name |
| 1 | B07 BC0001 | E-GUN C1 BACK COVER ASSEMBLY (COMPLETE) |
| 1.1 | C07 520015 | E-GUN C1/C2 BACK COVER OUTER LID (CONDUCTIVE) |
| 1.2.1 | B07 LG5005 | E-GUN C1 BACK LID KEYPAD AND KEY COVER |
| 1.2.2 | K06 LG5004 | E-GUN C2 BACK LID KEYLESS COVER |
| 1.3 | H01 1010308 | M3X8 YSB BOLT |
| 1.4 | H01 10303065 | 3X6,5 SCREW for PLASTIC N/A |
| 1.5 | C07 520016 | E-GUN C1/C2 BACK COVER INNER LID |
| 1.6 | C07 520017 | E-GUN C1/C2 BACK COVER INNER LID GASKET |
| 2 | C07 520019 | E-GUN C1/C2 CASCADE ISOLATION GASKET |
| 3 | C07 520009 | E-GUN C1/C2 POWDER PIPE ELBOW |
| 4 | B07 EGCN01 | E-GUN CASCADE |
| 5 | B07 EC0001 | E-GUN C1/C2 GUN BODY ASSEMBLY (COMPLETE) |
| 5.1 | C07 520001 | E-GUN C1/C2 GUN BODY MAIN PART |
| 5.2 | B07 520007 | E-GUN NOZZLE AIR FILTER UNIT |
| 6 | B07 EC0002 | E-GUN C1/C2 TOP POWDER PIPE ASSEMBLY (COMPLETE) |
| 6.1 | C07 520010 | E-GUN C1/C2 TOP POWDER PIPE |
| 6.2 | H02 015200 | O-RING Ø15X2 NBR70 |
| 7 | B07 EC0003 | E-GUN C1/C2 HANDLE ASSEMBLY (COMPLETE) |
| 7.1 | C07 520002 | E-GUN C1/C2 HANDLE BODY (CONDUCTIVE) |
| 7.2 | G05 RPD0605 | CONNECTOR FEMALE STRAIGHT HOSE Ø6-M5 |
| 7.3 | H01 1010308 | M3X8 YSB BOLT |
| 8 | C07 520011 | E-GUN C1/C2 BOTTOM POWDER PIPE |
| 9 | C07 520018 | E-GUN HOSE CONNECTOR SPRING |
| 10 | C07 520003 | E-GUN HOSE CONNECTOR LOCKING RING |
| 11 | B07 528005 | E-GUN C1/C2 GUN CABLE (5m) |
| 12 | B07 EC0004 | E-GUN HOSE CONNECTOR ASSEMBLY (COMPLETE) |
| 12.1 | C07 520004 | E-GUN HOSE CONNECTOR BODY |
| 12.2 | H02 012150 | O-RING Ø12X1,5 SILICONE |
| 13 | C07 520012 | E-GUN C1/C2 TRIGGER BODY |
| 14 | B07 LG5006 | E-GUN C1/C2 TRIGGER KEYPAD |
| 15 | H01 1050310 | E-GUN C1/C2 TRIGGER BODY SET-SCREW |
| 16 | B07 524002 | E-GUN NOZZLE TIGHTENING NUT |
| 17 | PLEASE CHECK NOZZLE TYPES SELECTION LIST | |
| Part | Order Code | Part Name |
| 1 | B07 ENJ001 | E-FEED V2 MAIN AIR FILTER MODULE (COMPLETE) |
| 1.1 | B07 ENJ003 | E-FEED V2 FEMALE QUICK CONNECTOR ADAPTOR W/ O-RING |
| 1.1.1 | C07 540008 | E-FEED V2 FEMALE QUICK CONNECTOR ADAPTOR |
| 1.1.2 | H02 0951501 | O-RING Ø9,5X1,5 NBR |
| 1.2 | C07 540009 | INJECTOR SINTERED FILTER * |
| 1.3 | C07 540007 1/8" | INJECTOR FILTER HOUSING (RED) |
| 2 | B07 ENJ002 | E-FEED V2 SUPPLEMENTARY AIR FILTER MODULE (COMPLETE) |
| 2.1 | B07 ENJ003 | E-FEED V2 FEMALE QUICK CONNECTOR ADAPTOR W/ O-RING |
| 2.1.1 | C07 540008 | E-FEED V2 FEMALE QUICK CONNECTOR ADAPTOR |
| 2.1.2 | H02 0951501 | O-RING Ø9,5X1,5 NBR |
| 2.2 | C07 540009 | INJECTOR SINTERED FILTER * |
| 2.3 | C07 540006 1/8" | INJECTOR FILTER HOUSING (BLUE) |
| 3 | B07 ENJ004 | E-FEED V2 INJECTOR NOZZLE CAP W/ O-RING (COMPLETE) |
| 3.1 | C07 540003 | E-FEED V2 INJECTOR NOZZLE CAP |
| 3.2 | H02 0090100 | E-FEED V2 INJECTOR NOZZLE CAP O-RING (9X1) |
| 4 | C07 540002 | E-FEED V2 INJECTOR NOZZLE * |
| 5 | B07 ENJ005 | E-FEED V2 INJECTOR MAIN BODY W/ O-RING (COMPLETE) |
| 5.1 | C07 540001 | E-FEED V2 INJECTOR MAIN BODY |
| 5.2 | H02 016201 | ORING Ø16X2 SILICONE (YELLOW) * |
| 6 | B07 540000 | E-FEED V2 BUSHING * |
| 7 | B07 ENJ006 | E-FEED V2 INJECTOR HOSE ADAPTOR (CONDUCTIVE) W/ O-RING (COMPLETE) * |
| 7.1 | H02 0130200 | E-FEED V2 INJECTOR HOSE ADAPTOR O-RING SILICONE (13X2) |
| 7.2 | C07 540004 | E-FEED V2 INJECTOR HOSE ADAPTOR (CONDUCTIVE) |
| 8 | C07 540005 | E-FEED V2 INJECTOR HOSE ADAPTOR TIGHTENING NUT |
1. Technoligy consult Service
2. One year warranty Service
3. After market Service
4. OEM Service
Sample order is available,welcome to test our product.
Hopes to work together with you in the near future.
Spraying equipment is widely used in all walks of life.
Inside package is plastic bag.
Outside package is paper box.
To make sure the safety in delivery.
We support all kinds of express delivery, air delivery, sea delivery, train delivery.
The customer can choose according to needs.
Litone Machinery Co., Ltd. is a leading supplier in the field of electrostatic powder coatings worldwide. From simple manual coating to fully automatic powder coating, our company provides solutions that can meet the high requirements of customers from all over the world in a wide range of industrial fields.
These technologically advanced, high-quality equipment and systems are developed and manufactured at Litone's headquarters in Weifang, China. Customers can use the most advanced coating laboratory for coating experiments. These findings are then integrated into the design of complex coating systems to tailor solutions for customers. Affiliated companies in Germany, the United Kingdom, the United States, Italy, France, India, Spain and Mexico and an extensive international distributor network in more than 60 countries/regions sell products to a wide range of industrial users.
1 Is it safe to order from Litone?
Yes,100% sure you are safe to order from us. Litone exported to many countries and we are the famous factory produce powder coating equipment more than 10 years in China.And successfully exported to more than 60 countries and regions.
2 Can I customized the machines?
Yes, we are a professional team for powder coating equipments, Our technician will design for you specially according to your needs and your factory, workpiece etc information.
3 What is this type of machine used for?
It used for the powder coating and line, plant.
4 How we ship goods?
Our shipping methods include sea and air to any port.
5 What is our billing method?
Our Payment methods: T/T, L/C, Western Union, PayPal,Xtransfer, etc
6 What does our packaging look like?
Our packaging is the appropriate packaging for the container.
){kind=link}